Home » Temperature Monitoring System » Wireless Monitoring System

Wireless Monitoring System

FMS Integration Temperature Monitoring Icon

Wireless Monitoring System options have grown in popularity over the years. These wireless-based systems have become much easier to configure.

Better flexibility to communicate to other systems. Batteries can last for years, instead of months.

The use of better frequency bands for longer distances for data to be transmitted.

The design and overall quality of the chipsets (hardware) allow them to be deployed in a wide range of applications.

They can do much more, than just monitor the temperature in the average room.

Data Center Monitoring

Cold Storage Monitoring

Food Monitoring

Greenhouse Monitoring

Medical Storage Monitoring

Cannabis Facility Monitoring

Laboratory Monitoring

RLE Falcon WiNG-MGR Wireless Gateway
FMS Integration Temperature Monitoring Icon

WiNG-MGR

Wireless Gateway

Get to Know WiNG-MGR

WiNG-MGR Wireless Monitoring System

WiNG-MGR Wireless Monitoring System

The RLE Falcon WiNG-MGR sets a new level of excellence with wireless monitoring systems and more. This Wireless Gateway uses all solid-state hardware. Requires no licensing for hardware or the number of wireless sensors deployed.

On-board trending of sensor data and notification for alerts. It hosts its own web interface, so no additional software is required to view data or configure the system.

WiNG-MGR Frequency Range

For applications in North America, there is the 900 MHz radio version. For other wireless environmental monitoring solutions, there is the 868 MHz gateway.

The wireless platform uses a proprietary signal, so the WiNG sensors only communicate to the gateway, so there is no threat of being hacked. This low-watt frequency has a better transmission distance than other wireless sensors on the market.

Easy System Integration with Open Protocols

The WiNG-MGR can be used as a stand-alone system or integrated back into a Buiding Management System (BMS) or other third-party-based monitoring software.

The WiNG-MGR supports Modbus, BACnet, and SNMP open protocols via the Ethernet port. This wireless gateway also has a two-wire RS485 port that supports Modbus-RTU and BACnet MS/TP.

 

WiNG-MGR Key Features

  • Proprietary wireless design

  • Available in 868MHz and 900MHz configurations

  • A transmission range between manager and sensors that is second to none:

    • Up to 100 feet (30.5m) through multiple walls

    • Up to 270 feet (82.3m) through one wall

    • Up to 600 feet (183m) direct line of sight

    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT range extender

  • Unparalleled sensor battery life:

    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)

    • Up 8 years at temperatures up to 122°F (50°C)

    • Up to 12-year battery life at room temperature

  • Support 250 sensors on a single manager, up to 400 sensors with range extenders

  • Open protocols support integration with BMS/NMS/DCiM via:

    • SNMP

    • Modbus

    • BACnet

  • Polling rate of 10-20 seconds

  • The web interface enables direct alarm notification and stand-alone operation

  • WiNG sensors monitor conditions including:

    • Temperature

    • Temperature/Humidity with optional calculated dew point

    • CO2

    • Leak detection cable or spot detectors

    • Digital input

    • Analog input

    • Thermistor

  • NO licensing fees – Firmware updates are available free of charge

WiNG-MGR v2 Specifications

Power: 24VAC @ 600mA max, 50/60Hz, 24VDC @ 600mA max.

Included Equipment: WiNG-MGR v2, PSWA-DC-24 power supply, antennas, rack mount tabs

Wired Relay Outputs: Two (2) Dry Contact, Form C, 1A @ 24VDC resistive, 0.5A @ 120VAC

Maximum Number of Wireless Sensors Per Manager: RLE recommends not exceeding 250 sensors per WiNG-MGR; 400 sensors per WiNG-MGR may be accomplished with range extenders, but the signal conflict will increase.

Communications: Available in 868MHz or 900MHz configurations

  • Ethernet: 10/100 BASE-T, RJ45 connector; 500VAC RMS isolation

  • RS232: DB9 female connector; 9600 baud; no parity; 8 data bits; 1 stop bit

  • EIA-485: 1200, 2400, 9600 or 19200 baud (selectable); no parity; even or odd; 8 data bits; 1 stop bit

  • USB: Serial port emulation for diagnostics; 115200 baud; no parity; 8 data bits; 1 stop bit

Protocols

  • TCP/IP, HTML, TFTP, SNMP: V1: V2C MIB-2 compliant; NMS Manageable with Get; IPv4; IPv6

  • Modbus (EIA-485): Modbus Server; RTU mode; Supports function codes 03

  • Modbus TCP/IP: Modbus Server; TCP/IP transmission protocol

  • BACnet/IP: ASHRAE STD 135-2004 Annex J

  • BACnet/MSTP: EIA-485

  • Terminal Emulation (RS232): VT100 compatible

Wireless Interface: Proprietary protocol from sensors to manager/range extender; mesh backbone between manager and range extender; appropriate receivers for configuration (868MHz or 900MHz), RP/SMA connectors for 868MHz-928MHz antennas.

Login Security: Web browser access (Ethernet); 8 users and passwords can be configured

Data Trending

  • Temperature: Records temperature data at 5-minute intervals; daily records; retains 30 days of information

  • Temperature/Humidity: Records temperature and humidity data at 10-minute intervals; daily records; retain 30 days of information

Operating Environment

  • Temperature: 32ºF to 140ºF (0ºC to 60ºC)

  • Humidity: 5% to 95% RH (Non-condensing)

  • Altitude: 15,000 ft (4572m) max.; 9,842ft (3000m) max. if applying more than 150V, 50/60Hz to relays from overvoltage category II circuit

Storage Temperature: -4ºF to 185ºF (-20ºC to 85ºC)

Mounting: Desktop, rack mount (tabs included)

Dimensions and Weight: 9.7”W x 4.8”D x 1.8”H (24.6cmW x 12.2cmD x 4.6cmH), 2.7lb (1.23kg)

Certifications: ETL listed; CE; conforms to UL 61010-1, EN 61010, EN 61000-3-2, EN61000-3-3; ETSI EN 301 489-1, ETSI EN 301 489-3; IEC 61326-1; certified to CSA C22.2 #61010; FCC X7J-A11072401, MCQ-XB900HP, and 47CFR 15B; IC 8975A-A11072401, 1846A-XB900HP, and ICES-003; RoHS compliant

RLE WiNG-T Wireless Temperature Sensor
FMS Integration Temperature Monitoring Icon

WiNG-T

Wireless Temperature Sensor

Wireless Temperature Sensor

WiNG-T

WiNG-T is the Wireless Temperature Sensor that is compatible with the WiNG-MGR wireless monitoring system.

  • Temperature Sensing Range from 32°F to 140°F

  • Small form factor 2.8”L x 1.1”W x 1.1”H

  • One 3.6V AA lithium battery

  • Range up to 600ft line of sight

  • Multiple mounting options

  • Uses 900MHz or 868MHz frequencies

WiNG Sensor Transmission Range

The WiNG system offers an unrivaled transmission range between sensors and manager: up to 100 feet across several walls, 270 feet via a single wall, and 600 feet indoors, direct line of sight.

While this range is more than enough for most applications, signals must occasionally be pushed through more complicated physical or loud RF environments. In these cases, the WiNG-RXT range extender can be used to increase the application’s direct line of sight transmission distance by up to 1,000 feet.

Not seen as a cybersecurity threat

With the constant changes in Cybersecurity policies, the WiNG family sensors will not make your punch list. WiNG sensors communicate only to the WiNG-MGR gateway. Using a proprietary signal and data, this line of wireless sensors does not join your facility’s network. There is only one ethernet connection to the WiNG-MGR.

 

WiNG-T Key Features

  • Proprietary wireless design

  • Available in 868MHz and 900MHz configurations

  • A transmission range between manager and sensors that is second to none:

    • Up to 100 feet (30.5m) through multiple walls

    • Up to 270 feet (82.3m) through one wall

    • Up to 600 feet (183m) direct line of sight

    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT range extender

  • Unparalleled sensor battery life:

    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)

    • Up 8 years at temperatures up to 122°F (50°C)

    • Up to 12-year battery life at room temperature

  • Support 250 sensors on a single manager, up to 400 sensors with range extenders

  • Polling rate of 10-20 seconds

WiNG-T Specifications

Power: 3.6V AA lithium battery

Battery Life

  • Up to 5 years when system spans full operating temperature range.

  • Up to 8 years at room temperatures up to 122°F (50°C)

  • Up to 12 years at room temperature

Shelf Life: 10 years in quiescent mode with battery installed

Transmission

  • Interval: 10-20 seconds (random)

  • Frequency: Available in 868MHz and 900MHz configurations

  • Range: Up to 600 ft line of sight

Temperature Accuracy

  • Room Temperature: Typical +/- 0.2°C; Max +/- 0.4°C; Room temperature is specified as 32ºF to 140ºF (0 to 60°C)

  • Full Operating Range: Typical +/- 0.6°C; Max +/- 1.0°C

Operating Environment

  • Temperature: -13ºF to 185ºF (-25ºC to 85ºC)

  • Humidity: 0% to 90% RH (Non-condensing)

  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Mounting: Free standing, magnets (included), 1U screw, mini din rail, zip ties

Dimensions and Weight: 2.8″L x 1.1”W x 1.1”H (7.1cmL x 2.8cmW x 2.8cmH), 0.08lb (0.036kg)

Certifications and Specifications: CE UL61010, CSA 22.2 #61010, IEC 61326-1, FCC 47CFR 15B, IC ICES-003, EN 61000-3-2, EN61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-3; FCC ID: X7J-A11072401: IC: 8975A-A11072401

RLE WiNG-TH Wireless Temperature and Humidity Sensor
FMS Integration Temperature Monitoring Icon

WiNG-TH

Wireless Temperature and Humidity Sensor

Wireless Temperature and Humidity Sensor

WiNG-TH

WiNG-TH is the Wireless Temperature/Humidity Sensor that is compatible with the WiNG-MGR wireless monitoring system.

  • Temperature Sensing Range from 32°F to 140°F

  • Humidity Sensing Range from 5% to 95% R.H.

  • Small form factor 2.8”L x 1.1”W x 1.1”H

  • One 3.6V AA lithium battery

  • Range up to 600ft line of sight

  • Multiple mounting options

  • Uses 900MHz or 868MHz frequencies

 

WiNG-TH Key Features

  • Proprietary wireless design

  • Available in 868MHz and 900MHz configurations

  • A transmission range between manager and sensors that is second to none:

    • Up to 100 feet (30.5m) through multiple walls

    • Up to 270 feet (82.3m) through one wall

    • Up to 600 feet (183m) direct line of sight

    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT range extender

  • Unparalleled sensor battery life:

    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)

    • Up 8 years at temperatures up to 122°F (50°C)

    • Up to 12-year battery life at room temperature

  • Support 250 sensors on a single manager, up to 400 sensors with range extenders

  • Polling rate of 10-20 seconds

  • Optional calculated dew point with the use of WiNG-TH and WiNG-MGR

WiNG-TH Specifications

Power: 3.6V AA lithium battery

Battery Life

  • Up to 5 years when system spans full operating temperature range.

  • Up to 8 years at room temperatures up to 122°F (50°C)

  • Up to 12 years at room temperature

Shelf Life: 10 years in quiescent mode with battery installed

Transmission

  • Interval: 10-20 seconds (random)

  • Frequency: Available in 868MHz and 900MHz configurations

  • Range: Up to 600 ft line of sight

Temperature Accuracy

  • Room Temperature: Typical +/- 0.2°C; Max +/- 0.4°C; Room temperature is specified as 32ºF to 140ºF (0 to 60°C)

  • Full Operating Range: Typical +/- 0.6°C; Max +/- 1.0°C

Humidity Accuracy

  • Standard Operating Range: Typical 2%; Max 3.5%; Standard operating range is specified as 20% to 80% RH (Non-condensing)

  • Full Operating Range: Typical 3.5%; Max 6%

Operating Environment

  • Temperature: -13ºF to 185ºF (-25ºC to 85ºC)

  • Humidity: 0% to 90% RH (Non-condensing)

  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Mounting: Free standing, magnets (included), 1U screw, mini din rail, zip ties

Dimensions and Weight: 2.8″L x 1.1”W x 1.1”H (7.1cmL x 2.8cmW x 2.8cmH), 0.08lb (0.036kg)

Certifications: CE UL61010, CSA 22.2 #61010, IEC 61326-1, FCC 47CFR 15B, IC ICES-003, EN 61000-3-2, EN61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-3; FCC ID: X7J-A11072401: IC: 8975A-A11072401

RLE WiNG-THRM Wireless Thermistor Sensor
FMS Integration Temperature Monitoring Icon

WiNG-THRM

Wireless Temperature 10K-2 Thermistor Sensor

Wireless 10k-2 Thermistor Temperature Sensor

WiNG-THRM

WiNG-THRM is the Wireless Temperature 10K-2 Thermistor Sensor that is compatible with the WiNG-MGR wireless monitoring system.

  • Temperature Sensing Range from -39°F to 187°F

  • Works with 10K-2 Thermistor Elements

  • Small form factor 2.8”L x 1.1”W x 1.1”H

  • One 3.6V AA lithium battery

  • Range up to 600ft line of sight

  • Multiple mounting options

  • Uses 900MHz or 868MHz frequencies

 

WiNG-THRM Key Features

  • Proprietary wireless design
  • Accepts one 10K-2 thermistor input (12-bit A/D conversion)
  • Available in 868MHz and 900MHz configurations
  • A transmission range between manager and sensors that is second to none:
    • Up to 100 feet (30.5m) through multiple walls
    • Up to 270 feet (82.3m) through one wall
    • Up to 600 feet (183m) direct line of sight
    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT range extender
  • Unparalleled sensor battery life:
    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)
    • Up 8 years at temperatures up to 122°F (50°C)
    • Up to 12 year battery life at room temperature
  • Support 250 sensors on a single manager, up to 400 sensors with range extenders
  • Polling rate of 10-20 seconds

WiNG-THRM Specifications

Power: 3.6V AA lithium battery

Battery Life

  • Up to 5 years when system spans full operating temperature range.
  • Up to 8 years at room temperatures up to 122°F (50°C)
  • Up to 12 years at room temperature

Shelf Life: 10 years in quiescent mode with battery installed

Transmission

  • Interval: 10-20 seconds (random)
  • Frequency: Available in 868MHz and 900MHz configurations
  • Range: Up to 600 ft line of sight

Thermistor Input:

  • Type: Accepts one 10K-2 thermistor input (12-bit A/D conversion)
  • Temperature Range: Processes temperature readings from -40ºF to 188ºF (-40ºC to 86.7ºC)

Operating Environment – WiNG Transmitter

  • Temperature: -13ºF to 185ºF (-25ºC to 85ºC)
  • Humidity: 0% to 90% RH (Non-condensing)
  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Operating Environment – Thermistor: Varies – consult the datasheet of your specific thermistor for details

Mounting: Free standing, zip ties, screw and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)

Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)

Certifications and Standards: CE UL61010, CSA 22.2 #61010, IEC 61326-1, FCC 47CFR 15B, IC ICES-003, EN 61000-3-2, EN61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-3; FCC ID: X7J-A11072401: IC: 8975A-A11072401

RLE WiNG-RTD Wireless RTD Temperature Sensor
FMS Integration Temperature Monitoring Icon

WiNG-RTD

Wireless RTD Temperature Sensor

Wireless RTD Temperature Sensor

WiNG-RTD

WiNG-THRM is the Wireless Temperature 10K-2 Thermistor Sensor that is compatible with the WiNG-MGR wireless monitoring system.

  • Temperature Sensing Range from -337°F to 302°F

  • Works with 1K Ohm platinum RTD

  • Two-wire PT1000 Type Probes

  • Small form factor 4.4”L x 2.5”W x 1.5”H

  • One 3.6V AA lithium battery

  • Range up to 600ft line of sight

  • Multiple mounting options

  • Uses 900MHz or 868MHz frequencies

WiNG-RTD Key Features

  • Proprietary wireless design

  • Accepts one wired 1K Ohm platinum RTD (PT1000) temperature sensor input

  • Available in 868MHz and 900MHz configurations

  • A transmission range between manager and sensors that is second to none:

    • Up to 100 feet (30.5m) through multiple walls

    • Up to 270 feet (82.3m) through one wall

    • Up to 600 feet (183m) direct line of sight

    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT range extender

  • Unparalleled sensor battery life:

    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)

    • Up 8 years at temperatures up to 122°F (50°C)

    • Up to 12-year battery life at room temperature

  • Support 250 sensors on a single manager, up to 400 sensors with range extenders

  • Polling rate of 10-20 seconds

WiNG-RTD Specifications

Power: 3.6V AA lithium battery

Battery Life

  • Up to 5 years when system spans full operating temperature range.

  • Up to 8 years at room temperatures up to 122°F (50°C)

  • Up to 12 years at room temperature

Shelf Life: 10 years in quiescent mode with battery installed

Transmission

  • Interval: 10-20 seconds (random)

  • Frequency: Available in 868MHz and 900MHz configurations

  • Range: Up to 600ft line of sight

Temperature Sensor Input

  • Type: One input, for use with 2-wire 1000 ohm platinum (pt1000) IEC Standard 385 curve probes

  • Temperature Range: Processes temperature readings from -337ºF to 302ºF (-205ºC to 150ºC)

Operating Environment

  • Temperature: -13ºF to 185ºF (-25ºC – 85ºC)

  • Humidity: 0% to 90% RH (Non-condensing)

  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

  • RTD Probe: Varies – consult the datasheet of your specific RTD probe for details

Mounting: Free standing, zip ties, screw and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)

Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)

Certifications and Standards: CE UL61010, CSA 22.2 #61010, IEC 61326-1, FCC 47CFR 15B, IC ICES-003, EN 61000-3-2, EN61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-3; FCC ID: X7J-A11072401: IC: 8975A-A11072401

RLE WiNG-DAP Wireless Differential Pressure Sensor
FMS Integration Air-Quality Monitoring Icon

WiNG-DAP

Wireless Differential Pressure Sensor

Wireless Differential Pressure Sensor

WiNG-DAP

WiNG-DAP is the Wireless Differential Pressure Sensor that is compatible with the WiNG-MGR wireless monitoring system.

  • Range from -500 to 500 Pa (-2 to +2 in H2O)

  • Small form factor 4.4”L x 2.5”W x 1.5”H

  • One 3.6V AA lithium battery

  • Range up to 600ft line of sight

  • Multiple mounting options

  • Uses 900MHz or 868MHz frequencies

WiNG-DAP Key Features

  • Proprietary wireless design
  • Monitors air pressure wirelessly
  • Available in 868MHz and 900MHz configurations
  • A transmission range between manager and sensors that is second to none:
    • Up to 100 feet (30.5m) through multiple walls
    • Up to 270 feet (82.3m) through one wall
    • Up to 600 feet (183m) direct line of sight
    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT range extender
  • Sensor battery life:
    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)
    • Up 8 years at temperatures up to 122°F (50°C)
    • Up to 12-year battery life at room temperature
  • Support 250 sensors on a single manager, up to 400 sensors with range extenders
  • Polling rate of 10-20 seconds

WiNG-DAP Specifications

Power: 3.6V AA lithium battery

Included Accessories: 3′ clear polyurethane tubing

Battery Life

  • Up to 5 years when system spans full operating temperature range.
  • Up to 8 years at room temperatures up to 122°F (50°C)
  • Up to 12 years at room temperature

Shelf Life: 10 years in quiescent mode with battery installed

Differential Pressure

  • Range: -500 to 500 Pa (-2 to +2 in H2O)
  • Accuracy: +/- 20 Pa measured at sensor input (not including polyurethane tubing); accuracy will degrade when the length of tubing exceeds 3′

Transmission

  • Interval: 10-20 seconds (random)
  • Frequency: Available in 868MHz and 900MHz configurations
  • Range: Up to 600ft line of sight

Operating Environment

  • Temperature: -13ºF to 185ºF (-25ºC – 85ºC)
  • Humidity: 0% to 90% RH (Non-condensing)
  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Mounting: Free standing, zip ties, screw, and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)

Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)

Certifications and Standards: CE UL61010, CSA 22.2 #61010, IEC 61326-1, FCC 47CFR 15B, IC ICES-003, EN 61000-3-2, EN61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-3; FCC ID: X7J-A11072401: IC: 8975A-A11072401

RLE WiNG-DI Wireless Digital Input Sensor

WiNG-DI

Wireless Digital Input Sensor

Wireless Digital Input Sensor

WiNG-DI

WiNG-DI is the Wireless Digital Input Sensor that is compatible with the WiNG-MGR wireless monitoring system.

  • Works with Dry-Contacts from Relay Outputs

  • Small form factor 4.4”L x 2.5”W x 1.5”H

  • One 3.6V AA lithium battery

  • Range up to 600ft line of sight

  • Multiple mounting options

  • Uses 900MHz or 868MHz frequencies

WiNG-DI Key Features

  • Proprietary wireless design

  • Accepts one digital dry contact input, configurable as normally open or normally closed

  • Available in 868MHz and 900MHz configurations

  • A transmission range between manager and sensors that is second to none:

    • Up to 100 feet (30.5m) through multiple walls

    • Up to 270 feet (82.3m) through one wall

    • Up to 600 feet (183m) direct line of sight

    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT range extender

  • Unparalleled sensor battery life:

    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)

    • Up 8 years at temperatures up to 122°F (50°C)

    • Up to 12-year battery life at room temperature

  • Support 250 sensors on a single manager, up to 400 sensors with range extenders

  • Polling rate of 10-20 seconds

WiNG-DI Specifications

Power: 3.6V AA lithium battery

Battery Life

  • Up to 5 years when system spans full operating temperature range.

  • Up to 8 years at room temperatures up to 122°F (50°C)

  • Up to 12 years at room temperature

Shelf Life: 10 years in quiescent mode with battery installed

Transmission

  • Interval: 10-20 seconds (random)

  • Frequency: Available in 868MHz and 900MHz configurations

  • Range: Up to 600ft line of sight

Digital Input: One dry contact input configurable as NO or NC

Operating Environment

  • Temperature: -13ºF to 185ºF (-25ºC – 85ºC)

  • Humidity: 0% to 90% RH (Non-condensing)

  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Mounting: Free standing, zip ties, screw, and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)

Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)

Certifications and Standards: CE UL61010, CSA 22.2 #61010, IEC 61326-1, FCC 47CFR 15B, IC ICES-003, EN 61000-3-2, EN61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-3; FCC ID: X7J-A11072401: IC: 8975A-A11072401

RLE WiNG-ANLG Wireless Analog Sensor

WiNG-ALNG

Wireless Analog Sensor

Wireless Analog Sensor

WiNG-ANLG

WiNG-ANLG is the Wireless Digital Input Sensor that is compatible with the WiNG-MGR wireless monitoring system.

  • Works with 0-5V, 0-10V and 4-20mA Transducers
  • Small form factor 4.4”L x 2.5”W x 1.5”H
  • One 3.6V AA lithium battery
  • Range up to 600ft line of sight
  • Multiple mounting options
  • Uses 900MHz or 868MHz frequencies

WiNG-ANLG Key Features

  • Proprietary wireless design
  • Accepts one analog input
  • Field configurable for a 4-20mA, 0-5V, or 0-10V analog input
  • Available in 868MHz and 900MHz configurations
  • A transmission range between manager and sensors that is second to none:
    • Up to 100 feet (30.5m) through multiple walls
    • Up to 270 feet (82.3m) through one wall
    • Up to 600 feet (183m) direct line of sight
    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT range extender
  • Unparalleled sensor battery life:
    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)
    • Up 8 years at temperatures up to 122°F (50°C)
    • Up to 12-year battery life at room temperature
  • Support 250 sensors on a single manager, up to 400 sensors with range extenders
  • Polling rate of 10-20 seconds

WiNG-ANLG Specifications

Power: 3.6V AA lithium battery

Battery Life

  • Up to 5 years when system spans full operating temperature range.
  • Up to 8 years at room temperatures up to 122°F (50°C)
  • Up to 12 years at room temperature

Shelf Life: 10 years in quiescent mode with battery installed

Transmission

  • Interval: 10-20 seconds (random)
  • Frequency: Available in 868MHz and 900MHz configurations
  • Range: Up to 600ft line of sight

Analog Input: One input configurable as 4-20mA, 0-5V, or 0-10V (with 12-bit A/D conversion)

Operating Environment

  • Temperature: -13ºF to 185ºF (-25ºC – 85ºC)
  • Humidity: 0% to 90% RH (Non-condensing)
  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Mounting: Free standing, zip ties, screw, and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)

Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)

Certifications and Standards: CE UL61010, CSA 22.2 #61010, IEC 61326-1, FCC 47CFR 15B, IC ICES-003, EN 61000-3-2, EN61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-3; FCC ID: X7J-A11072401: IC: 8975A-A11072401

RLE Falcon WiNG-RXT Wireless Range Extender
FMS Integration Temperature Monitoring Icon

WiNG-RXT

Wireless Range Extender

Wireless Range Extender

WiNG-RXT

WiNG-RXT is the Wireless Range Extender used with the WiNG-MGR wireless monitoring system.

  • Works the WiNG Family product line

  • Wall Adapter Powered

  • Range up to 1000ft line of sight

  • Multiple mounting options

  • Uses 900MHz or 868MHz frequencies

WiNG-RXT Key Features

  • Use in conjunction with the WiNG-MGR and WiNG sensors to increase transmission range by up to 1,000 feet (305m) direct line of sight

  • Includes a wide range power supply

  • Wall mount brackets allow you to mount the RXT in an unobtrusive yet effective location.

  • External antennas are included for maximum signal coverage.

WiNG-RXT Specifications

Power: 5VDC @ 400mA max.; PoE Kit available (sold separately)

Included Equipment: WiNG-RXT, PSWA-DC-5 power supply, antennas, wall mount brackets

USB Communication Port: Serial port emulation for firmware upgrades and diagnostics

Range

  • Up to 1,000 ft (305m) indoors, direct line of sight to WiNG-MGR or another WiNG-RXT.

  • Up to 600 ft (183m) direct line of sight to WiNG sensors.

  • Up to 270ft (82.3m) through one wall to WiNG sensors.

  • Up to 100 ft (30.5m) through multiple walls to WiNG sensors.

Operating Environment

  • Temperature: 32ºF to 140ºF (0ºC – 60ºC)

  • Humidity: 5% to 95% RH (Non-condensing)

  • Altitude: 15,000 ft (4572m) max.

Storage Temperature: -4ºF to 185ºF (-20ºC – 85ºC)

Mounting: Freestanding, wall mount (included)

Dimensions and Weight: 4.5”W x 4.8”D x 1.6”H (11.4cmW x 12.2cmD x 4.1cmH), 1.2lb (0.534kg)

Certifications: ETL listed; CE; conforms to UL 61010-1, EN 61010; EN 61326-1; EN 301489-1; EN 301489-3; certified to CSA C22.2 NO, 61010.1; RoHS compliant; FCC ID: MCQ-XB900HP; IC: 1846A-XB900HP